M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.2 Screen Configuration
6.2 Screen Configuration
6.2.1 Type
The following three types of screens are used to configure the PLC On-board.
Full screen
Split screen
Popup screen
Message screen
The following diagrams illustrate examples of these screens. The area inside the blue lines in each diagram represents the
screen.
[Full screen]
[Split screen]
IB-1501614-B
This screen is used to display the entire screen.
This screen splits the full screen into two areas and displays.
This screen is displayed over the full screen display or split screen.
This screen displays confirmation messages, error messages, and other messages.
262