M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.13 NC File Operation Menus
6.13.6 Delete Data Popup Screen
6.13.6.1 Outline
This enables PLC data stored in the current project to be deleted.
6.13.6.2 Screen Display Items
The following table describes the screen display items for the delete data popup screen.
Item name
Data type
Data name
(*1) Selecting data of different types (program and comments) from the list on the file operation screen and displaying this
data on the delete data screen causes the data type and data name of the selected data to be selected and displayed.
(*2) Refer to "6.6.1 PLC Data Used by the PLC On-board" for information on restrictions to PLC data names and titles.
6.13.6.3 Enabled/Disabled State of Menu Keys
The menu keys displayed on the delete data popup screen are always enabled.
IB-1501614-B
This displays programs and comments.
Programs are the default selection.(*1)
This is left blank.(*1)
These are restricted to a maximum of 8 single-byte alphanumeric numeric char-
acters.(*2)
362
Display state