M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.5 Common Items
Setting execute conditions for sampling trace
(1) Open [Debug] - [Sampling Trace] - [Trace Setting], and configure the settings on the [Setting of Executing and Saving]
tab.
Item
Trace Execution Method
Trace Data (setting + result) Storage
Target Memory
File Name
Trace Auto Startup Setting
(*1) Since [Target Memory] is the RAM CNC controller, trace data (result) are erased at power OFF.
Only one trace data set (setting, result) can be saved on the CNC controller. Trace data result is overwritten every time
sample trace is executed.
(2) Configure settings on the [Condition Setting] tab as follows.
(*) No setting is required if [Execute using existing trace settings in the PLC] is selected as the trace execution method.
IB-1501614-B
Execute after overwriting current trace settings in the PLC
Standard RAM (*1)
Any file name
Not check
108
Setting