M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.14 External File Operation Menus
6.14.3.7 Select External Projects
Normal operation
To directly input the path and project name
(1) Press the [PATH] menu key to move the focus to the path input field. Input the path where the project data is stored.
This operation is not necessary if the read source does not need to be changed.
(2) Press the [PROJECT NAME] menu key to move the focus to the project name input field. Enter the name for the project
data.
(3) Pressing the [SELECT] menu key closes the select external project popup screen and returns to the "EXT.->NC" screen.
The PLC data stored in the selected project is displayed in the list on the "EXT.->NC" screen.
When operation mode of a project is GX Works2, if the project and folder have the same name as the input name, the project
is selected first.
Only a project with one file format can be read for GX Works2 project.
To select a project from the list
(1) Press the [LIST] menu key to move the focus to the list. Use the up and down arrow keys to select existing project data.
(2) Pressing the [INPUT] menu key or pressing the [SELECT] menu key closes the select external project popup screen and
returns to the "EXT.->NC" screen. The PLC data stored in the selected project is displayed in the list on the "EXT.->NC"
screen.
Only a project with one file format can be read for GX Works2 project.
[List for the select external project screen]
[List for the "EXT.->NC" screen]
IB-1501614-B
Select the project data.
Display the PLC data
stored in the selected
project.
410