M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.2 Screen Configuration
6.2.3.2 Menu Key Details
Developer Mode Menu Keys
The following describes the menu keys in each tier. (The enabled/disabled status of each menu key is described later.)
[MAIN] menu keys
This is the highest tier of the PLC On-board menu. Other types of functions are called from this menu.
[This is the menu available when the sequence program is stored in the connected project.]
NC FILE
EXT.FILE OPERATION
LADDER
DEVICE
PARAM.
PLC DIAGNOSIS
ENVIRON. SETTING
SELECT PROJECT
[This is the menu available when the sequence program is not stored in the connected project.]
FILE OPE.
EXE.->NC
ROM WRITE
PROJECT SETTING
DEVICE SETTING
PLC DIAGNOSIS
CONNECT NC CHANGING
SELECT PROJECT
IB-1501614-B
This changes to the [NC FILE] menu keys.
This changes to the [EXT. FILE OPERATION] menu keys.
This displays the ladder screen and starts the monitor.
This changes to the [DEVICE] menu keys.
This changes to the [PARAM.] menu keys.
This displays the PLC diagnosis screen.
This changes to the [ENVIRON. SETTING] menu keys.
This selects the current project.
This is enabled when using multiple projects and smart safety observation function
is enabled.
This displays the file operation screen.
This displays the "EXT.->NC" screen.
This displays the ROM write popup screen.
This displays the project setting screen.
This displays the device setting screen.
This displays the diagnosis screen.
This displays the connect NC change screen.
This selects the current project.
This is enabled when using multiple projects and smart safety observation function
is enabled.
268