Enabled/Disabled State Of Menu Keys; Status During Screen Displays; Operation Of Key Presses - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus

6.17.2.3 Enabled/Disabled State of Menu Keys

The following table describes the conditions upon which menu keys displayed on the device batch monitor screen are
enabled/disabled.
The menu keys which are not described in the following table are always enabled.
Menu name
Start monitor
Stop monitor

6.17.2.4 Status during Screen Displays

The following table describes the status when displaying the device batch monitor screen.
Item name
Device
Format
Display
Format
List

6.17.2.5 Operation of Key Presses

The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
Device
Format
Display
Format
List
Start monitor
Stop monitor
Device test
PLC RUN/STOP
Close
Condition upon which it is enabled/disabled
Disabled after the monitor is started
Disables after the monitor is stopped
This is left blank.
This selects the [BIT & WORD] option.
This selects the [16 BIT INTEGER] option.
This selects the [DEC] option.
This is left blank.
Refer to "6.17.2.7 Closing the Device Batch Monitor Screen".
This selects the device input field.
This sets the focus to the format. This changes the format selection when the fo-
cus is already set.
This sets the focus to the display selection field. This changes the selection in
the display selection field when the focus is already set.
This sets the focus to the value selection field. This changes the selection in the
value selection field when the focus is already set.
The focus is applied to the list.
Refer to "6.17.2.6 Starting and Stopping the Monitor for the Selected Device".
Refer to "6.17.2.6 Starting and Stopping the Monitor for the Selected Device".
This displays the device test popup screen.
Refer to "6.15.5 Device Test Popup Screen".
This displays the PLC RUN/STOP screen.
Refer to "6.13.10 PLC RUN/STOP Popup Screen".
Refer to "6.17.2.7 Closing the Device Batch Monitor Screen".
509
Operation
Operation
IB-1501614-B