M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.15 Ladder Menus
6.15.5.8 Closing the Device Test Popup Screen
Use any of the following methods to close the device test popup screen.
Methods to close the screen
Press the [CLOSE] menu key.
Press the left arrow key.
Press the [ESC] key on the software keyboard.
6.15.5.9 Precautions when Executing Device Test with Label Name
A device test can be executed by inputting label name instead of bit device name or word device name.
Note the following points.
A device test with label name is executed for the device of the program currently displayed.
When the name of a global label and a local label are the same, the device test is executed for the device of the local label.
When a device test is executed on a screen other than the ladder monitor, the device test is executed for the label of the
the program displayed on the ladder monitor.
When a label name is input instead of a word device name, if the label type and the format selected in "Display" and "Sign"
selection field do not match, the device test cannot be executed.
471
IB-1501614-B