Enabled/Disabled State Of Menu Keys; Status During Screen Displays; Operation Of Key Presses; Closing The Common Pointer Screen - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.18 Parameter Menus

6.18.3.3 Enabled/Disabled State of Menu Keys

The menu keys displayed on the common pointer settings screen are always enabled.

6.18.3.4 Status during Screen Displays

The following table describes the status when displaying the common pointer settings screen.
Item name
This is the default focus position when the screen is displayed.
Common pointer No.
This displays the initial P number for common pointers set to the project specified for operation.

6.18.3.5 Operation of Key Presses

The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
Close

6.18.3.6 Closing the Common Pointer Screen

Use any of the following methods to close the common pointer settings screen.
Methods to close the screen
Press the [CLOSE] menu key.
Press the left arrow key.
Press the [ESC] key on the software keyboard.
IB-1501614-B
Operation
Refer to "6.18.3.6 Closing the Common Pointer Screen".
564
Operation