Editing Notes - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.15 Ladder Menus
 Entering statements into P labels
Statements can be entered into P labels using the following procedure.
(1) Move to the edit position
Move the cursor to the position of the P label where the statement is to be entered using the basic operation keys.
（Refer to "6.15.1.6 Moving the Cursor".）
(2) Display the enter symbol popup screen
Press the [INPUT] key to display the enter symbol popup screen.
(3) Enter the statement
Enter the statement into the enter symbol popup screen as in the following example. Add a semicolon after the label when
entering.
(Example) Entering a P label statement
After the entry is complete, press the [INPUT] menu key. Press the [INPUT] menu key to input the statement in the P label.
(4) Check the details of edits
After entering the statement, press the [CONVERT LADDER] menu key to confirm the edit. (Refer to "6.15.2.7 Converting
Programs")

6.15.2.10 Editing Notes

Outline
Notes can be added to the program displayed on the ladder screen.
A note, just like a statement, is text string data added to each coil and function instruction to make it easy to understand the
flow of the entire program.
Notes can be edited in accordance with the following restrictions.
Notes
Example display of a note
Integrated notes and peripheral notes
Notes include integrated types and peripheral types. Integrated types and peripheral types are designated by the first
character in the string.
The first character is an asterisk.
The first character is not an asterisk.
Note the following precautions regarding integrated notes.
Saving user PLCs containing an integrated note is saved in the NC requires a large amount of memory in the user PLC.
Input character range
64 single-byte alphanumeric characters Sequence programs
Peripheral note
Integrated note
Precautions
453
Storage destination data type
IB-1501614-B