M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.11 Basic Operation
To use multiple projects
Procedure
Start
Main
Select the current project.
Main
Transition to the ladder
screen.
Main/ladder
Stop the PLC.
PLC RUN/STOP
Main/ladder
Edit the ladder.
Main/ladder
Monitor the ladder.
Main/ladder
Run the PLC.
Main/ladder
PLC RUN/STOP
Main/ladder
Test the device.
Main/ladder
Return to the main screen.
Complete
IB-1501614-B
Operation
Screen position
SELECT PROJECT
LADDER
PLC RUN/STOP
STOP EXECUTE
EDIT
Edit the ladder.
CONVERT LADDER
MONITOR
PLC RUN/STOP
RUN EXECUTE
DEVICE TEST
Test the device.
322
Menu button
Select the current operation project.
PLC data is automatically read and the
system transitions to the ladder
screen. The monitor also automatically
starts.
Display the PLC RUN/STOP popup
screen.
Stop the PLC.
Switch to the edit mode.
Edited ladder data is confirmed by the
conversion operation.
Switch to the monitor mode.
Display the PLC RUN/STOP popup
screen.
Run the PLC.
Display the device test popup screen.
Repeat the edit and debug procedure
until the debug results are correct.
Return to the main screen.
Select the project at the main screen
to select a different project storing the
sequence program to be edited.