Reading Out From Cnc Controller On Standard Screen; Operation Procedure - Mitsubishi Electric M800VW Series Manual

Plc development

Hide thumbs Also See for M800VW Series:

Table of Contents

M800V/M80V Series PLC Development Manual

5 Peripheral Development Environment (GX Works2)

5.8 PLC Message Development

5.8.5 Reading out from CNC Controller on Standard Screen

(1) Press [I/O] menu on the maintenance screen.

(2) Set the device name, directory and file name of the source as follows. Specify the output file in the destination field.

 Display example of a PLC message file for MTB

 Display example of a PLC message file for users

(3) Press the menu key [Trnsfr A->B] to start file transfer.

IB-1501614-B