Enabled/Disabled State Of Menu Keys; Status During Screen Displays; Operation Of Key Presses; Rotary Switch Status - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.19 PLC Diagnosis Menus

6.19.1.3 Enabled/Disabled State of Menu Keys

The following table describes the conditions upon which menu keys displayed on the program settings screen are enabled/
disabled.
The menu keys which are not described in the following table are always enabled.
Menu name
Error Jump This is enabled when an error occurs with a sequence program and the sequence step No.
that generated the error is known.
Hidden when operation mode is GX Works2.

6.19.1.4 Status during Screen Displays

The following table describes the status when displaying the PLC diagnosis screen.
Item name
Rotary switch
PLC operation status
Error display
Common error information

6.19.1.5 Operation of Key Presses

The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
Error jump
Close

6.19.1.6 Rotary Switch Status

This displays the status of the "CS2" rotary switch on the NC device body. The display changes depending on the status of
the "CS2" rotary switch as illustrated in the following diagram.
 When 0 (normal)
 When 1 (PLC is not running)
Condition upon which it is enabled/disabled
This displays the current status of the rotary switch.
This displays the PLC operation status of the currently used project.
This displays information on errors that occurred with the currently used project.
This displays detailed information on errors that occurred with the project select-
ed in the error information.
Refer to "6.19.1.9 Closing the PLC Diagnosis Screen".
Refer to "6.19.1.8 Error Jump".
Refer to "6.19.1.9 Closing the PLC Diagnosis Screen".
577
Operation
Operation
IB-1501614-B