Mitsubishi Electric M800VW Series Manual page 509

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.15 Ladder Menus
Registering ladders to the entry ladder monitor
Pressing the [REGISTER MONITOR] menu key registers the device or ladder at the cursor position to the registration monitor
in accordance with the following rules.
Status
Not using split screen mode
Displaying the entry ladder monitor
Displaying the entry device monitor
Selecting the entry device monitor
Deleting registered ladders
 Deleting individual ladder blocks
Perform the following operations in order to delete ladder circuits registered in the entry ladder monitor one block at a time.
(1) Use the [SPLIT SCREEN TRANSITION] menu key to select the entry ladder monitor.
(2) Use the keys as described in "6.3.1 Basic Operation Keys" to transition to the left end of the ladder block you want to
delete. The background color of the ladder block changes to blue after transitioning to the left end of the ladder block.
(3) Press the [DELETE] key.
 Deleting all registered circuits
Perform the following operations in order to delete all ladder circuits registered in the entry ladder monitor.
(1) Use the [SPLIT SCREEN TRANSITION] menu key to select the entry ladder monitor.
(2) Press the [DELETE ALL REG. CIRCUITS] menu key. Pressing the [DELETE ALL REG. CIRCUITS] menu key displays
the following message.
(3) Pressing the [YES] menu key closes the message screen and all ladder circuits registered in the entry ladder monitor are
deleted.
Pressing the [NO] menu key closes the message. The ladder circuits registered in the entry ladder monitor are not
deleted.
IB-1501614-B
Operation when the register monitor menu key is pressed
Registers the ladder at the cursor position to the entry ladder
monitor.
Registers the device at the cursor position to the entry device
monitor.
484