Screen Display Items - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.12 Main Screen

6.12.2 Screen Display Items

The following table describes the screen display items on the main screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Software keyboard
The information in the following table is displayed in the main screen.
Item
Project No. Displays project numbers up to the maximum number of projects
This displays labels assigned to projects.
Labels
However, for the user safety sequence, this section is always blank.
Programs This displays whether or not programs are stored in the projects.
Read This displays whether or not PLC data has been read.
This displays the execution sequence set for each project.
Execution sequence
This is left blank if the execution sequence has not been set.
Project ratio This displays the project ratio set for each project.
This displays the name of the connected NC.
This displays the number of the current project.
This displays the project label.
Alarm messages are displayed when alarms occur.
This is displayed only when parameters are enabled.
Description
343
Display state
IB-1501614-B