Creating Device Comment; Development Procedure - Mitsubishi Electric M800VW Series Manual

Plc development

Hide thumbs Also See for M800VW Series:

Table of Contents

M800V/M80V Series PLC Development Manual

5 Peripheral Development Environment (GX Works2)

5.9 Creating Device Comment

None of the device comment specifications are specific to Mitsubishi Electric CNC. For details of development procedures,

refer to "GX Works2 Operating Manual (Common)". This chapter provides the overview of the procedure for developing

device comments including the development procedure and input/output procedure using general-purpose tool.

There are two types of standard procedure for developing device comments as shown below.

 Indirect input

This is a method to transform for GX Works2 using a generally available text editor and spreadsheet as well as a data

conversion package. It is used when the amount of device comments is large and managed with commercial tools.

Device comment

for this CNC

(1) Only CSV files can be read. Unlike GX Developer, TXT files cannot be read.

 Direct input

To input device comment directly from GX Works2 method. It is used when the amount of device comments is small and add

and correct them.

Sequence program

for this CNC

CNC controller

IB-1501614-B