Mitsubishi Electric M800VW Series Manual page 572

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus
Displaying CSV file
This displays the directory and CSV file name stored directly under the root path of the default external device when the
storage setting popup screen is displayed for the first time.
This displays the details of the path where the previously selected CSV file is stored when the storage setting popup screen is
displayed after a storage setting is already performed. This displays path details directly under the root of the default external
device when there is no specified path.
Operation of key presses
The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
List
Path
File name
Setting
Close
Specifying CSV file
 To directly input the path and file name
(1) Press the [PATH] menu key , then the focus is moved to the path entry field. Enter the path where the CSV file is stored.
This operation is not necessary if the save destination does not need to be changed.
(2) Press the [FILE NAME] menu key to move the focus to the file name entry field. Enter the name for the CSV file.
(3) After pressing the [SETTING] menu key closes the storage setting popup screen, the screen returns to the create CSV
file screen. The selected path and file name are displayed in the select project of the create CSV file screen.
CSV files can be output to GX Developer projects. They cannot be output to GX Works2 projects.
 To select a file name from the list
(1) Press the [LIST] menu key to move the focus to the list. Use the up or down arrow key to select an existing fine name.
(2) Pressing the [INPUT] menu key or pressing the [SETTING] menu key closes the storage setting popup screen and
returns to the create CSV file screen. The selected path and file name are displayed in the select project of the create
CSV file screen.
A project saved in GX Works2 format cannot be selected.
A GX Works2 project saved in one file format is not displayed in the list.
A GX Works2 project saved in work space format is displayed like a folder.
Closing the storage setting popup screen
Use any of the following methods to close the storage setting popup screen.
Methods to close the screen
Specify the storage destination.
Press the [CLOSE] menu key.
Press the left arrow key.
Press the [ESC] key on the software keyboard.
Refer to " Closing the storage setting popup screen".
The focus is applied to the list.
The focus is applied to the path entry field.
The focus is applied the file name entry field.
Refer to "Specifying CSV file".
Refer to "Closing the storage setting popup screen".
547
Operation
IB-1501614-B