Mitsubishi Electric M800VW Series Manual page 470

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.15 Ladder Menus
(3) Delete line menu key
Pressing the [DELETE LINE] in the [COPY/INSERT] menu keys on the first page of the ladder edit menu inserts one blank
line at the cursor position as illustrated in the following diagram.
[Before deleting the line]
[After deleting the line]
Marking ranges
Ranges can be designated in units of ladder blocks or circuits.
 Designating the range in ladder blocks
Ranges can be selected in units of ladder blocks using the following procedure.
(1) Move to the position to select the range
Use the basic operation keys to move the cursor to the left end (position displaying the label number and step number) of
the ladder block of the desired range.
(2) Display the copy/insert menu.
Pressing the [COPY/INSERT] menu key on the first page of the ladder edit menu changes the menu keys as illustrated in
the following diagram.
[[COPY/INSERT] menu]
445 IB-1501614-B