Mitsubishi Electric M800VW Series Manual page 553

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus
 Entering the value of word devices
(1) Press the menu key [WORD DEVICE SETUP] to select the word device setup.
(2) Use up, down, left or right arrow key to move the cursor to the arbitrary position of value column.
(3) Press the [INPUT] key to display the value entry field below the list, and the focus is applied.
(4) Enter the value you want to specify, and press the [INPUT] key. When pressing [INPUT] key, the value entry field is
closed, and the entered value is displayed at the cursor position in the specified devices.
 Entering the format for word devices
(1) Press the menu key [WORD DEVICE SETUP] to select the word device setup.
(2) Use up, down, left or right arrow key to move the cursor to the arbitrary position of format column.
(3) Press the [INPUT] key in the format field based on "Setting selection items in lists" in "Operation key List: Screen Items
(Control)". The format will be displayed in order. (DEC -> HEX -> DEC -> ...)
 Entering the mask for word devices
(1) Press the menu key [WORD DEVICE SETUP] to select the word device setup.
(2) Use up, down, left or right arrow key to move the cursor to the arbitrary position of mask column.
(3) Press the [INPUT] key to display the mask entry field below the list, and the focus is applied.
(4) Enter the value you want to specify, and press the [INPUT] key. Press the [INPUT] key to close the device entry field. The
entered device displays at the cursor position in the specified devices.
IB-1501614-B 528