Mitsubishi Electric M800VW Series Manual page 230

M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.10 Creating Label
 Data types
This table lists the data types that can be used in label setting on the CNC controller. Besides these, the names of FBs, arrays
and structures used can be set as data types.
For details on arrays and structures, refer to "GX Works2 Operating Manual (Common)".
◎ : Selectable, ×: Not selectable
Data type on GX Works2
Bit
Word [signed]
Double word [signed]
Word [unsigned]/Bit string [16 bit]
Double word [unsigned]/Bit string [32 bit]
FLOAT (Single Precision)
FLOAT (Double Precision)
String (32)
Time
Timer
Counter
Retentive timer
Pointer
 Devices assigned automatically
This table lists devices that can be assigned automatically to labels on the CNC controller along with cautions.
Do not use devices not listed here as devices assigned automatically.
Data type of device
Word device
Bit device
Pointer
Timer
Accumulated timer
Counter
Data type in CSV file
BOOL
INT
DINT
WORD
DWORD
REAL
LREAL
STRING[32]
TIME
TIMER
COUNTER
RETENTIVETIMER
POINTER
Usable device
D device, W device
M device, B device
P device
T device
ST device
C device
Support on the CNC controller
Ladder
Precaution
Do not set the range set for project-common device as device
assigned automatically
Do not set the range set for project-common device as device
assigned automatically
To set device assigned automatically, set common pointer No
in [PLC Parameter] -> [PLC System]
Do not set the range set for device assigned automatically as
a variable time
Do not set the range set for device assigned automatically as
a variable timer
Do not set the range set for device assigned automatically as
variable counter
205
ST
◎ ◎
◎ ◎
◎ ◎
×
◎
×
◎
◎ ◎
◎ ◎
◎ ◎
×
◎
×
◎
×
◎
×
◎
×
◎
IB-1501614-B