Mitsubishi Electric M800VW Series Manual page 283

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.1 Outline
Function
Zoom Display
Comment ON/OFF
Monitor Value Display
Ladder checks
CHECK PROGRAM
PLC data operation
Add New Data
Delete Data
Rename Data
Device operation
Device Batch Monitor
Entry Device Monitor
Sampling trace
Parameters
Program Setting
Device setting
Common Pointer Setting
Multi-project
Parameters
NC file operation
LIST
Number of Execution Step Dis-
play
Amount of Free Space Display This displays the amount of free space of temporary memory and ROM.
POU List
PLC data auto load
Open
ROM Write
Format
PLC RUN/STOP
Cancel Password
PLC Version up
External File Operation
External -> NC
NC -> External
Delete Project
Verify Project
Diagnosis
IB-1501614-B
Purpose of function
This switches the ladder display size between three sizes.
Reduced [Equivalent to a full-screen display of 11 contacts at 640 x 480
resolution]
Standard [Equivalent to a full-screen display of 11 contacts at 1024 x 768
resolution]
Enlarged (120%) [Equivalent to a full-screen display of 11 contacts at
1280 x 1024 resolution]
This switches the display of comments as configured by [COMMENT
DISPLAY SETTING].
This changes displays of the current value for the device on the ladder
monitor between on/off.
This checks programs (ladders).
This adds new PLC data.
This deletes PLC data.
This changes the name of PLC data.
This monitors from the specified device on one screen.
This monitors devices at separated positions in circuits or different types
of devices simultaneously on one screen.
This traces (data collection) PLC device signals and displays the trace
result in chronological order.
Also this saves the trace data to external media, and writes or reads the
trace file for external media.
This configures the execution order of sequence programs.
This configures the range of devices used in a project.
This enables confirmation of common pointer settings used in a project.
This configures parameters related to the operation of multiple projects.
This displays PLC data in temporary memory and ROM.
This displays the number of PLC data steps in execution area.
This displays the POU list in PLC data of temporary memory and ROM.
This automatically reads PLC data from temporary memory upon start-
up.
This displays the PLC data in temporary memory at the on-board editing
area.
This saves the PLC data in temporary memory to ROM.
This formats the temporary memory.
This runs and stops the PLC.
This cancels the password set in PLC data.
This rewrites the PLC data in the on-board editing area, temporary mem-
ory area and built-in ROM area with the version upgrade data on external
media.
This reads PLC data on external media into the NC and opens it on the
on-board.
This saves CNC PLC data to external media.
This deletes projects on external media.
This verifies NC PLC programs and PLC programs on external media.
258
Operation target
GX Develop-
er user safety GX Works2
sequence user safety
(without la- sequence
bels)
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
× ×
× ×
× ×
× ×
○ ○
○ ○
○
(Cannot be
○
specified with
label name)
× ×
× ×
× ×
× ×
○ ○
○ ○
○ ○
×
○
○ ○
○ ○
× ×
× ×
× ×
× ×
× ×
× ×
× ×
× ×
× ×