M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.6 Developing Simple Project
5.6.6.1 Operation Procedure
(1) Start the operation screen by the following operation on GX Works2.
[Online] -> [Export to ROM Format]
Note
Only [Memory card (Flash)] is valid as [Target].
(2) Click [Execute] to display the following dialog, and click [Yes].
Note
When [Yes] is clicked in the above dialog, sequence program files on the ROM in the CNC the CNC controller are over-
write and deleted. This should be done with extreme caution.
(3) The operation is completed when the following dialog appears. Click [OK].
IB-1501614-B
140