Entering Passwords - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.13 NC File Operation Menus

6.13.11.6 Entering Passwords

Separate entry
Use the following procedure to enter the file password.
(1) Press the [LIST] menu key to select the list.
(2) Use the up/down arrow keys, Page Up key, and Page Down key to move to the password display column for the desired
file.
(3) Press the [INPUT] key to display the password input field at the bottom of the list and move the focus.
(4) Enter the password and then press the [INPUT] key. Press the INPUT key to close the password input field. The pass-
word entered at the cursor position in the list is displayed using asterisks.
 Passwords are displayed using asterisks as they are input.
(5) Pressing the [CLOSE] menu key cancels the password being entered, closes the password input field, and returns to the
cursor position to the list.
Batch input
Passwords can be cleared in batches if multiple files have the same password.
Use the following procedure to enter batch settings.
(1) Press the [RANGE (START)] menu key to select the start of the range.
(2) Enter the start number for batch settings.
(3) Press the [RANGE (END)] menu key to select the end of the range.
(4) Enter the end number for batch settings.
(5) Press the [PASSWORD] menu key to select the password.
(6) Enter the password for batch settings.
Passwords are displayed using asterisks as they are input.
(7) Press the [BATCH SETTINGS] menu key. Pressing the batch settings key displays the password entered for the speci-
fied range using asterisks.
(*) Batch settings are enabled only when files are consecutively displayed in the list.
377 IB-1501614-B