Mitsubishi Electric M800VW Series Manual page 469

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.15 Ladder Menus
Inserting lines
New lines can be inserted at the cursor position using the following procedure.
(1) Move to the position where the line is to be inserted
Move the cursor to the position where the line is to be inserted using the basic operation keys. （Refer to "6.15.1.6 Moving
the Cursor".）
(2) Display the copy/insert menu.
Pressing the [COPY/INSERT] menu key on the first page of the ladder edit menu changes the menu keys as illustrated in
the following diagram.
[[COPY/INSERT] menu]
(3) Insert line menu key
Pressing the [INSERT LINE] menu key in the [COPY/INSERT] menu keys on the first page of the ladder edit menu inserts
one blank line at the cursor position as illustrated in the following diagram.
Deleting lines
Lines can be deleted at the cursor position using the following procedure.
(1) Move to the position where the line is to be deleted
Move the cursor to the position where the line is to be deleted using the basic operation keys. （Refer to "6.15.1.6 Moving
the Cursor".）
(2) Display the copy/insert menu.
Pressing the [COPY/INSERT] menu key on the first page of the ladder edit menu changes the menu keys as illustrated in
the following diagram.
[[COPY/INSERT] menu]
IB-1501614-B 444