Mitsubishi Electric M800VW Series Manual page 506

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.15 Ladder Menus
[Selecting the entry device monitor]
Transitioning between the ladder screen and the split screen
Use the [SPLIT SCREEN] transition menu key to transition between the ladder screen and the split screen (entry device
monitor). Pressing the [SPLIT SCREEN TRANSITION] menu key transitions the selection to the split screen when the ladder
screen is selected and transitions the selection to the ladder screen when the split screen is selected.
Registering devices to the entry device monitor
Pressing the [REGISTER MONITOR] menu key registers the device or ladder at the cursor position to the registration monitor
in accordance with the following rules.
Status
Not using split screen mode
Displaying the entry ladder monitor
Displaying the entry device monitor
Selecting the entry device monitor
Operation when the register monitor menu key is pressed
Registers the ladder at the cursor position to the entry ladder
monitor.
Registers the device at the cursor position to the entry device
monitor.
481 IB-1501614-B