Mitsubishi Electric M800VW Series Manual page 644

M800V/M80V Series PLC Development Manual
9 Appendix 3: PLC Function
9.1 Enhanced PLC Security Mode
 Limitations on devices
There are limitations on the devices that can be input/output to the E/U project.
Apart from those limitations posed by the specifications of the NC, certain limitations on devices can be set by the MTB.
Inform end users of the limitations on devices after the MTB configured the PLC end-user parameters and multi-project
parameters.
For example, when the number of devices for PLC end-user parameters and multi-project parameters are configured as "PLC
end-user parameter setting" and "Device setting" indicated as follows,, the limitations on devices to be provided to end users
are described in the next table.
[PLC end-user parameter setting]
# Item
11762
E/U Project No. E/U project number
(PR)
11763 Initial number of Y de-
E/U Y Dev No.
(PR) vice for E/U
11764 Quantity of Y devices
E/U Y Dev Size
(PR) for E/U
11765 Initial number of M de-
E/U M Dev No.
(PR) vice for E/U
11766 Quantity of M devices
E/U M Dev Size
(PR) for E/U
11767 Initial number of D de-
E/U D Dev No.
(PR) vice for E/U
11768 Quantity of D devices
E/U D Dev Size
(PR) for E/U
[Device setting]
Category
Common device X, Y, F, R, ZR
Independent device
L, SB, B, V, SW, T, ST, C, W
(variable)
Independent device
SM, SD, Z
(fixed)
Independent device
N, P
(fixed)
Common/indepen-
M, D
dent device
Specify the project number to be used as the E/
U project by the end user.
Specify the starting device number of the Y de-
vices customizable by the end user.
Specify the number of Y devices customizable
by the end user.
Specify the starting device number of the proj-
ect-common M devices customizable by the end
user.
Specify the number of project-common M devic-
es customizable by the end user.
Specify the starting device number of the proj-
ect-common D devices customizable by the end
user.
Specify the number of project-common D devic-
es customizable by the end user.
Device
All devices can be input.
Y0 to YFF can be output.
All devices can be input.
All devices can be output.
All devices can be input.
All devices can be output.
All devices can be input.
None of devices can be output
All devices can be input.
The following devices can be output: M1024 to M2047, M15360 to M31719,
D128 to D511, D1024 to D2047
Details
Limitations on devices
619
Setting value
3
0
100
1024
1024
128
384
IB-1501614-B