M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.16 Environment Setting Menus
6.16.4.5 Operation of Key Presses
The following table describes the operation of each menu key and the keys on the CNC keyboard when pressed.
Item name
Left arrow key
Project language
Settings
CLOSE
6.16.4.6 Setting Project Language
(1) Press the [Project language] menu key and select one of the following GX Works2 project language(*1): "English", "Japa-
nese", "Chinese (Simplified)", "Chinese (Traditional)", "Korean (Hangul)".
(2) Press the [SET] menu key and issue the GX Works2 configuration.
Pressing the [SET] menu key closes the GX Works2 settings screen and returns to the environment settings screen.
(*1) Refer to "6.5.3 Precautions for Language Setting for GX Works2 Project" for details.
6.16.4.7 Closing GX Works2 Settings Screen
Use any of the following methods to close GX Works2 settings screen.
Press the [SET] menu key.
Press the [CLOSE] menu key.
Press the left arrow key.
Press the [ESC] key on the software keyboard.
Refer to "6.16.4.7 Closing GX Works2 Settings Screen".
This sets the focus to the project language.
This changes the selection of project language when the focus is already set.
Refer to "6.16.4.6 Setting Project Language".
Refer to "6.16.4.7 Closing GX Works2 Settings Screen".
Methods to close the screen
503
Operation
IB-1501614-B