M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.5 Common Items
5.5.8.4 Setting the Program Execution Order
In the following cases, set the execution method and execution order to sequence programs.
When creating the sequence programs with the multi-program method
When creating sequence programs of main process with ST language
This operation is required before a sequence program is executed on the CNC controller, and parameter files must be written
to the CNC controller.
Note
If this operation is not completed when the multi-program method is in use or when creating sequence programs of main
process with ST language, an error will occur on the RUN of sequence programs.
(1) Select [Program] tab.
(2) Select the name of the sequence program to be registered for execution from the program list on the left side of the fol-
lowing screen, and press [Insert]. Select the execution mode from the registered program list on the right side.
(3) After registering all sequence programs to execute, click [End].
IB-1501614-B
94