M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.13 NC File Operation Menus
6.13.9 ROM Write Popup Screen
6.13.9.1 Outline
This is used to store PLC data stored in the temporary memory area inside the NC into an SD card.
6.13.9.2 Screen Display Conditions
If automatic ROM write is set, the ROM write menu is not displayed in the NC file operation menu.
6.13.9.3 Enabled/Disabled State of Menu Keys
The menu keys displayed on the ROM write popup screen are always enabled.
6.13.9.4 Operation of Key Presses
The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
Execute
Close
Refer to "6.13.9.6 Closing the ROM Write Screen".
Refer to "6.13.9.5 Writing PLC Data in the Temporary Memory Area into ROM".
Refer to "6.13.9.6 Closing the ROM Write Screen".
371
Operation
IB-1501614-B