M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.13 NC File Operation Menus
6.13.13 Select Version Up Data Popup Screen
6.13.13.1 Outline
This screen enables you to select the updating version data stored directly under the external device.
This function can read only the project created with PLC on-board or with GX Developer. A project created with GX Works2
cannot be read.
6.13.13.2 Screen Display Items
The following table describes the screen display items for the select version up data popup screen.
Item name
List
Path
Version up data name
Title
6.13.13.3 Enabled/Disabled State of Menu Keys
The menu keys displayed on the select version up data popup screen are always enabled.
6.13.13.4 Status during Screen Displays
The following table describes the status when displaying the select version up data popup screen.
Item name
List
Path
Version up data name
Title
IB-1501614-B
The File name column displays the external device list or the updating
version data.
The Date of creating column is always blank.
The Title column displays the title set in the project when the selected
data is in the project format.
This displays the path where the updating version data is stored.
This displays the name of the updating version data that is selected in the
list.
This displays the title set in the project when the selected updating ver-
sion data is in the project format.
Refer to "6.13.13.6 Displaying Updating Version Data".
This is blank or displays the path that is displayed in the List.
This is blank or displays the name of the updating version data that is selected
in the list.
This is blank or displays the title set in the project when the selected updating
version data is in the project format.
390
Display state
Operation