Operation Key List; Basic Operation Keys - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)

6.3 Operation Key List

6.3 Operation Key List

6.3.1 Basic Operation Keys

The following table lists the keys used to operate the PLC On-board.
Key
A to Z, 0 to 9 These keys are used to enter data.
One-byte symbols such as These keys are used to enter password to cancel block password.
"!"
INSERT This key changes the edit mode when editing circuits between the overwrite and insert modes.
DELETE This key deletes the last character input that has not yet been issued.
C.B This key deletes input character strings that have not yet been issued.
INPUT This key issues the input data. It also selects data.
These keys are used to move the cursor up, down, left and right and to select items.
↑ , ↓ , → , ←
This key moves screen items in the forward order.
→ |
This key moves screen items in the reverse order.
| ←
These keys transition to the next highest menu tier and close popup windows.
or ESC
This transitions to same-tier menus.
Page Up This key moves screens up in pages.
Page Down This key moves screens down in pages.
SP This key enters and removes checks from check boxes.
<,> The "<,>" key may not be available depending on the specific model. In such a case, use the "(,)"
key as a substitute.
EOB This key turns the display of device comments on the ladder screen ON and OFF.
# This key switches between screens when using the split screen display.
IB-1501614-B
Description
274