M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.2 Screen Configuration
[Entry ladder monitor (split screen) menus]
This menu contains functions used to operate the Entry Ladder monitor (split screen).
FIND
DEVICE TEST
ENTRY LADDER ALL DEL.
DEVISION RATIO CHANGE
MOVEMENT ON SPLIT SCREEN
ZOOM DISPLAY
PLC RUN/STOP
CLOSE
[FB instance monitor menu]
This menu contains functions used to operate the FB instance monitor.
FIND
FIND STEP NO.
DEVICE TEST
FB Instance Monitor
Current Value Monitor Changeover
(10/16)
PLC RUN/STOP
Comment ON/OFF
ZOOM DISPLAY
BACK
This displays the find popup screen.
This displays the device test popup screen.
This deletes all circuits registered in the Entry Ladder monitor.
This changes the ratio of the split screens for the ladder registration monitor.
This transitions the focus between the split screens.
This changes the display magnification of the ladder screen.
This displays the PLC RUN/STOP popup screen.
This closes the entry ladder monitor screen.
This displays the find popup screen.
This displays the find step No. popup screen.
This displays the device test popup screen.
This displays the FB instance monitor at a cursor position.
This changes the current value display between decimal and hexadecimal.
This displays the PLC RUN/STOP popup screen.
This turns the device comment display ON and OFF.
This changes the display magnification of the ladder screen.
This returns to "Ladder monitor" screen or "FB instance monitor" screen.
271
IB-1501614-B