Screen Display Items; Enabled/Disabled State Of Menu Keys - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.14 External File Operation Menus
Pressing the [EXT. -> NC] menu from the external file operation screen displays the select external project popup screen as
illustrated in the following diagram. If this screen displays while an external project is not selected, PLC data cannot be
displayed in the list.

6.14.2.2 Screen Display Items

The following table describes the screen display items for the "EXT.->NC" screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard
List

6.14.2.3 Enabled/Disabled State of Menu Keys

The following table describes the conditions upon which menu keys displayed on the "EXT.->NC" screen are enabled/
disabled.
The menu keys which are not described in the following table are always enabled.
Menu name
Select/cancel all data
Parameter + Program
PLC messages
Read
IB-1501614-B
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
Alarm messages are displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
This displays PLC data stored in the selected on the select external proj-
ect screen.
This displays nothing if there is nothing stored or no PLC data has been
selected.
Condition upon which it is enabled/disabled
Enabled when operation mode is GX Developer and selectable PLC data has been
added to the list
Enabled when operation mode is GX Developer and selectable PLC data has been
added to the list
Enabled when operation mode is GX Developer and selectable PLC data has been
added to the list
Enabled when selectable PLC data has been added to the list
402
Display state