M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.10 Creating Label
5.10.3 Writing Method of Indirect Input
This section describes how to describe when creating label settings using tools like spreadsheet for each label type.
The following example shows the label setting using spreadsheet.
Global label
Data format of col-
umns
Class
Describe the class name of label.
Conversion cannot be done without class name. Always describe a device.
Types of class are described later.
Label name
Describe label name.
Conversion cannot be done without label name. Always describe a device.
Up to 32 one-byte characters can be described.
Actual device names and reserved characters cannot be used.
Data type
Describe the data type of label.
Conversion cannot be done without data type. Always describe a device.
Data types are described later.
Constant
Describe the numeric value assigned to label when the class is VAR_GLOBAL_CONSTANT.
Device
Describe devices assigned to label.
Automatically assigned when device is blank.
Comment
Describe comment of label.
Up to 1024 one-byte characters can be described.
Remark
Describe supplementary information for comment of label.
Up to 1024 one-byte characters can be described.
Relation with system
Item related to system labels. Not supported by CNC controllers.
label
System label name
Item related to system labels. Not supported by CNC controllers.
Attribute
Item related to system labels. Not supported by CNC controllers.
Save the above data in the Unicode format, and change the extension to ".csv".
IB-1501614-B
Description
198
The first two rows are for
Header. Input "Label" and
column data format in the
table below in an
appropriate language.
Input class and label in the
same row.