M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.2 Screen Configuration
6.2.3 Menu Keys
The menu keys consist of the 10 buttons arranged on the bottom of the PLC On-board and the arrow keys arranged on the left
and right edges. (area inside the blue lines)
The menu keys may be enabled (black character display) or disabled (gray character display) depending on the state of the
NC and the PLC On-board.
Item name
Menu keys
Left arrow key
Right arrow key
6.2.3.1 Menu Key Tiers and Transitions
The menu keys are divided into several tiers. Pressing corresponding menu keys enables transitions to lower tiers. Pressing
the left arrow key enables transitions to higher tiers, and pressing the right arrow key enables transitions on the same tier.
The following table summarizes each menu tier.
Corresponding
menu
Level 1
Level 2
Main
NC file operation
External file operation
Circuit
Device
Parameters
PLC diagnosis
Environment settings
Switch pages
Transition to same-tier menus
These execute functions and the display of screens corresponding to the menu names
written on the buttons. Blank menu keys are disabled.
This closes displayed popup screens (described later) and transitions to upper-tier
menus.
This transitions to same-tier menus.
Monitor 1
Monitor 2
Edit 1
Edit 2
Device batch monitor
Device register monitor
Sampling trace
Multi-project parameter
Description
Level 3
Circuit symbol 1
Circuit symbol 2
Copy/Insert line
Project settings
Device settings
267
Level 4
IB-1501614-B