Enabled/Disabled State Of Menu Keys; Status During Screen Displays; Operation Of Key Presses - Mitsubishi Electric M800VW Series Manual
Plc development
Hide thumbs
Also See for M800VW Series:
- Connection and set up manual (696 pages) ,
- Programming manual (968 pages)
Table of Contents
Advertisement
M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.13 NC File Operation Menus
6.13.11.3 Enabled/Disabled State of Menu Keys
The following information describes the conditions upon which menu keys displayed on the cancel password popup screen
are enabled/disabled.
The menu keys which are not described in the following table are always enabled.
Menu name
PWD lock for all data
6.13.11.4 Status during Screen Displays
The following table describes the status when displaying the cancel password popup screen.
Item name
Type
Data name
Password
Range start
Batch
Range end
settings
Password
6.13.11.5 Operation of Key Presses
The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
List
Execute
Range start
Range end
Password
Batch settings
PWD lock for all data
Close
IB-1501614-B
Condition upon which it is enabled/disabled
Enabled when the following menu keys are selected
[NC FILE OPERATION] - [PASSWORD CANCELLATION]
[EXT. FILE OPERATION] - [PASSWORD CANCELLATION]
If the file selected to have the password cleared exists, the file type is displayed. If it does
not exist, the display is blank.
If the file selected to have the password cleared exists, the file name is displayed. If it
does not exist, the display is blank.
This is the default focus position when the screen is displayed.
This is left blank.
This displays the lowest number.
This displays the highest number.
This is left blank.
Refer to "6.13.11.9 Closing the Cancel Password Popup Screen".
This sets the focus to the password.
Refer to "6.13.11.8 Canceling Passwords".
Batch settings: Sets the focus to the start of the range.
Batch settings: Sets the focus to the end of the range.
Batch settings: Sets the focus is applied to the password.
This sets the password for the files set from the start of the range to the end of
the range with the password set in [BATCH SETTINGS] - [PASSWORD].
Refer to "Batch input".
This sets all files set with passwords to the password not entered state (pass-
word locked state).
Refer to "Locking the Password for All Data".
Refer to "6.13.11.9 Closing the Cancel Password Popup Screen".
Operation
Operation
376
Advertisement
Table of Contents
