M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus
6.17.3 Entry Device Monitor Screen
6.17.3.1 Outline
This monitors devices at separated positions in ladders or different types of devices simultaneously on one screen.
The program cannot be searched by label name.
6.17.3.2 Screen Display Items
The following table describes the screen display items for the file list screen.
Item name
Connected NC name
Current project No.
Current project label
Monitor/Edit display
PLC status (RUN/STOP) display
Alarm message
Left arrow key
Software keyboard
List
Display state
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
Starting the monitor displays [MONITOR]. Stopping the monitor cancels
the display.
This displays the PLC status (RUN/STOP) for the monitored project.
This is displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
This displays the monitored device, current project, and monitoring re-
sults.
511
IB-1501614-B