M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.5 Common Items
5.5.2.2 Switching Projects to Access
Set which projects in the CNC to access. If not set, the access destination is project 1. The number of projects that can be
connected to depends on the setting of Multi-project parameter "Maximum project No. parameter".
How to connect to projects 1 to 4
The figure below shows how to connect to projects 1 to 4.
[Screen for selecting connection target]
Change target CPU to 1 through 4 to switch
projects to access to 1 through 4
Setting items
Network Communication Route
Access to the Ethernet module specified on PCL side I/F
Multi CPU setting
Machine 1 to 4
(*1) Double-click [Ethernet] to display the setting item.
IB-1501614-B
Click
Ethernet
Switch to multi-project 1 to 4
Setting
78
Remarks
(*1)