Mitsubishi Electric M800VW Series Manual page 126

M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.5 Common Items
Click the [Switch Chart/Detail] button to display detailed data.
Trace count, trace condition, trigger condition, and trace count after trigger can be set in trace setting.
Trace is executed when trace conditions are all met.
After trigger conditions are met, trace is executed for the number of times set in the trace count after trigger, then finishes. The
status before and after trigger conditions are met can be sampled.
Trace count set value
Set value for trace count after trigger
Bit device
Trace start Trigger condition satisfied Trace end
From satisfacion of trigger condition to trace end
101 IB-1501614-B