Mitsubishi Electric M800VW Series Manual page 560

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus
Entering trace devices
The entry method of trace device is as follows.
 Entering devices
(1) Press the menu key [BIT DEVICE] or [WORD DEVICE] to select the bit device or word device.
(2) Use the up or down arrow key, or the Page-up or Page-down key to move the cursor to the arbitrary position of device
column.
(3) Press the [INPUT] key to display the device entry field at the bottom of the list and move the focus.
(4) Enter the device you want to specify, and press the [INPUT] key. Then, the device entry field is closed, and the entered
device is displayed at the cursor position in the specified devices.
Device cannot be specified with label name.
 Deleting devices 1
(1) Use up or down arrow key, PageUp, or PageDown key to move the cursor to the position where the device you want to
delete is displayed in the device display column.
(2) Pressing the [DELETE] key deletes the device at the cursor position.
 Deleting devices 2
(1) Use up or down arrow key, PageUp, or PageDown key to move the cursor to the position where the device you want to
delete is displayed in the device display column.
(2) Pressing the [DELETE LINE] menu key deletes the line at the cursor position in the list and moves the remaining lines
below the cursor position up one line.
 Entering the type of bit devices
(1) Press the menu key [BIT DEVICE] to select the bit device setup.
(2) Use up, down, left or right arrow key to move the cursor to the arbitrary position of type column.
(3) Press the [INPUT] key in the type field based on "Setting selection items in lists" in "Operation key List: Screen Items
(Control)". The type will be displayed in order. (COIL -> CONNECT -> COIL -> ...)
535 IB-1501614-B