Mitsubishi Electric M800VW Series Manual page 162

M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.6 Developing Simple Project
 Operating procedure for simple projects (with labels)
The operating procedure when "use label" is set is described below.
(1) Start the operation screen by the following operation on GX Works2.
[Online] -> [Read from PLC]
(2) Select [Program Memory/Device Memory] in [Target Memory Setting] for [Symbolic Information] on the following screen.
Select "GX Works2 (Simple project)", and click [Execute].
Note
 [Program Memory/Device Memory] is the only valid option for [Target Memory Setting].
 Click [Refresh] before reading symbolic information.
 For details on read parameters before reading symbolic information, refer to "5.5.8.6 Writing and Reading Parameters
to CNC Controller".
 When symbolic information is read, labels and FB are also read as well as sequence programs.
 When a simple project with labels is selected, a sequence program only by itself cannot be read.
137 IB-1501614-B