Mitsubishi Electric M800VW Series Manual page 468

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.15 Ladder Menus
Inputting lines (vertical and horizontal)
(1) Move to the edit position
Use the basic operation keys to move the cursor to the edit position. （Refer to "6.15.1.6 Moving the Cursor".）
(2) Input lines
Pressing the [LADDER SYMBOL 1] or the menu key on the first page of the ladder edit menu changes the menu keys as
illustrated in the following diagram.
[[LADDER SYMBOL 1] menu]
Pressing any of the menu keys in the area inside the red lines inputs a vertical or horizontal line as illustrated in the
following diagrams.
 Vertical lines: A vertical line is input at the bottom-left of the cursor.
 Horizontal lines: A horizontal line is input at the cursor position.
(3) Deleting lines
(a) Deleting vertical lines
Move the cursor to the position such that the vertical line to be deleted is at the bottom-left of the cursor and then
press the [DELETE] menu key in the [LADDER SYMBOL 2] menu keys.
Pressing the [DELETE] menu key deletes the vertical line at the position to the bottom-left of the cursor.
(b) Deleting horizontal lines
Move the cursor to the horizontal line position to be deleted and press the [DELETE] key to delete the horizontal line
at the cursor position.
443 IB-1501614-B