Mitsubishi Electric M800VW Series Manual page 302

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.3 Operation Key List
Inputting values
 Items that can be input directly
Perform the following operation to input values (text strings and numbers) into direct-input items such as that marked by the
red circle in the following diagram.
(1) Select the input item. (Refer to "Selecting input and selection items")
(2) Use the keyboard to input values.
[(Example) "CROSS REF. LIST" screen]
Press the [INSERT] key to switch between the two edit modes (overwrite/insert). Switching the edit mode changes the shape
of the cursor.
Overwrite
 Items that cannot be input directly
Perform the following operation to input values (text strings and numbers) into input items not capable of direct input such as
lists.
(1) Select the input position in the list. (Refer to "Selecting the input position")
(2) Use the keyboard to issue the [INPUT] key.
Issuing the [INPUT] key displays and selects the input item (area inside the blue lines in the following diagram).
(3) Use the keyboard to input values.
(4) Use the keyboard to issue the [INPUT] key.
Issuing the [INPUT] key closes the input item and displays the input item at the selected position.
[INSERT] key pressed Insert
277 IB-1501614-B