Backing Up Sequence Programs And Other Data; Backup Of Entire Plc-Related Data; Backup Target Data - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)

5.14 Backing Up Sequence Programs and Other Data

5.14 Backing Up Sequence Programs and Other Data
This section explains the methods for backing up the developed sequence programs and PLC related data in a personal
computer.

5.14.1 Backup of Entire PLC-related Data

This section describes how to back up entire PLC-related data.
When the multi-project function is active, data for all projects are backed up in a batch.

5.14.1.1 Backup Target Data

The following data can be backed up.
Related data type
Sequence programs
(1)
Parameter
(2)
Sequence programs comment
(3)
Message
(4)
Multi-project setting parameters
(5)
Remark
Sequence programs code
Execution order setting information, etc.
GX Works2 comment data
Message data such as alarm messages, operator messages
and PLC switches in each language
Multi-project function setting information
235 IB-1501614-B