Configuration; Common Screen Items - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.2 Screen Configuration

6.2.2 Configuration

6.2.2.1 Common Screen Items

The following diagram illustrates the common screen items.
(1) (4) (2)
(5)
(8)
No Item name
Connected NC name
(1)
Current project No.
(2)
Current project label
(3)
Menu position display
(4)
PLC alarm message
(5)
Unsaved data alarm message
(6)
Soft keyboard
(7)
Menu keys
(8)
IB-1501614-B
(3)
(6) (7)
This displays the name of the connected NC.
This displays the current project number. However, if the user safety se-
quence is set to the operation target, "SafePLC1" or "SafePLC2" is dis-
played.
Background color changes as follows depending the operation mode of
the operation target project.
GX Developer: Blue
For details on the "Operation mode", refer to "6.1.3 Operation Mode of
Project".
This displays labels assigned to projects. However, if the user safety se-
quence is set to the operation target, this section is always blank.
This displays the menu position for the currently displayed full screen.
[For project]
The alarm message is displayed when the user sequence occurred ille-
gally. Refer to "5.13.2 Checking PLC Alarms on CNC Controller" for de-
tails.
[For user safety sequence]
SAFE PLC ALARM is displayed when the user sequence occurred ille-
gally. For the contents of PLC alarm, refer to "NC message" of "Alarm
MSG" on the diagnosis screen of Mitsubishi Electric standard screen.
Use "Diagn" key described in "6.20.3 Special Keys" to move to the diag-
nosis screen of Mitsubishi Electric standard screen.
For the contents of messages, refer to "M800/M80 Series Smart safety
observation Specification manual".
This displays alarm messages when data has not been saved to the in-
ternal ROM.
Soft keyboard (only when the software keyboard parameter is enabled)
This menu is used to operate screens.
Description
GX Works2: Green
264
(8)