Mitsubishi Electric M800VW Series Manual page 167

Plc development

Hide thumbs Also See for M800VW Series:

Table of Contents

M800V/M80V Series PLC Development Manual

5 Peripheral Development Environment (GX Works2)

5.6 Developing Simple Project

When verification finishes, the verify result screen is displayed. Double-click a file name to display on the screen the detailed

result as shown below. Unlike GX Developer, matched places are also displayed on GX Works2. Mismatched contents are

displayed in red. Click [Find/Replace] - [Next Unmatch] and [Find/Replace] - [Previous Unmatch] to find previous and next

mismatch places. Double-click mismatched contents to display and edit the corresponding parts in the GX Works2 file.

Since the verification with PLC is executed for actual ladder (ladder with labels and functional blocks compiled) after compile,

sequence programs with labels displayed cannot be verified.

(1) The verification result is displayed by mnemonic codes as shown in the figure above regardless of the setting of program-

ming language (ladder diagram or ST language).

IB-1501614-B