M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.15 Ladder Menus
6.15.11 Block Password Disable screen
6.15.11.1 Outline
On this screen, block password set to project POU is disabled.
Refer to "6.6.3.2 Block Passwords for PLC Data" for block password specifications.
Block password disable screen
6.15.11.2 Screen display items
Item name
Password
6.15.11.3 Enabled/Disabled State of Menu Keys
The menu keys displayed on the block password disable screen are always enabled.
6.15.11.4 Operation of Key Presses
Item name
Left arrow key
Execute
CLOSE
6.15.11.5 Canceling Block Password
Normal operation
(1) Enter the set password.
(2) Press the [EXECUTE] menu.
Pressing the menu key closes the block password disable screen and continues with the original process.
Abnormal operation
This following describes the details of error messages displayed when entering passwords and pressing the [EXECUTE]
menu key and the corrective action.
Error message
The entered password is not correct.
Enter correct password.
6.15.11.6 Block Password Disable Screen
Use any of the following methods to close the block password disable screen.
Press the [CLOSE] menu.
Press the left arrow key.
Press the [ESC] key on the software keyboard.
Enter the password.
Passwords are displayed as "*".
Input range: 6 to 32 characters
Refer to "6.6.3 Passwords for PLC Data" for the characters that can be input.
This closes the block password disable screen.
Refer to "6.15.11.5 Canceling Block Password"
This closes the block password disable screen.
Error details
This is displayed when the [EXECUTE] menu
key is pressed after entering an incorrect pass-
word.
Methods to close the screen
489
Operation
Operation
Enter the password before pressing the [EXE-
CUTE] menu key.
Remedy
IB-1501614-B