Mitsubishi Electric M800VW Series Manual page 339

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.11 Basic Operation
To use multiple projects
Procedure
Start
Main
Select the current project.
Main
Store the PLC data stored
in the current project into
an external device.
Main/External file operation
Main/External file
operation/NC -> External
Save external project
Main/External file operation
Return to the main screen.
Complete
IB-1501614-B
Operation
Screen position Menu button
SELECT PROJECT
EXT. FILE OPERATION
NC -> EXT.
SELECT/CANCEL
WRITE
PATH
PROJECT NAME
TITLE
SELECT
314
Select the current operation project.
Select the data to back up.
The save external project screen
displays.
Enter the [Project Name], [Title], and
[Path] used to store the backup PLC
data.
Run the [Select] operation after
entering the path.
Return to the main screen.
Repeat this procedure until all PLC
data stored in all projects is backed up.