Table of Contents
Advertisement
M800W/M80W Series Connection and Setup Manual
39 Appx.2: Protection Setting
(Note 5) Following operations are available to operate at the protection level 6 and over.
- Modal output, one-shot output and modal clear
- PLC-STOP
- S analog adjustment
- Absolute position setting
- Servo diagnosis
- Collection setting
- HMI ending
- Screen size change
- PLC indexing test operation
39.2 Returning the Password to the Non-input State (Operation level 0 to 3)
Operation Methods
(1)
Press the menu [0-3 opn level].
(2)
Press the [Y] or [INPUT] key.
39.3 Changing the Operation Level to One of 4 to 6
Operation Methods
(Example) Change the operation level to "6"
(1)
Press the menu [4-6 opn level].
(2)
Enter the operation level to be changed to with a number.
(Example) 6 [INPUT]
(3)
Enter the password of the level to be changed.
The menu [0-3 opn level] is highlighted.
The operation message "Change opn. level back to 0 to 3? (Y/
N)" is displayed.
When the protection level setting is not saved, the operation
message "Save the protective level setting? (Y/N)" is
displayed, and the above message appears after Y/N is
entered.
The operation message "Operation level has returned to 0 to
3." is displayed, and the highlighted menu [0-3 opn level]
returns to normal.
The operation level returns to one of operation levels 0 to 3 in
accordance with the current signal status.
All menus are displayed in gray.
The menu [4-6 opn level] is highlighted.
The cursor appears on the current operation level.
The operation message "Select the opn. level to be changed
to." is displayed.
The operation message "Type in your password." is
displayed.
<When the password is correct>
The operation message "Operation level has changed." is
displayed, and the operation level after the change is
displayed in the current operation level field.
<When the password is incorrect>
The operation message "Your password is incorrect." is
displayed, and the operation level returns to the previous one.
In both cases, the highlighted menu returns to normal, and the
cursor disappears, too.
621
IB-1501268-K
Advertisement
Table of Contents
