Table of Contents
Advertisement
Main
Group
Access to the "User", "Service" and "Factory" groups is by means of passwords, the management of which is explained in
the following chapter.
2.2.2
Password management
There are three menu groups that may be accessed upon entering a numeric password. Their access levels are as follows:
•
"User" password, for the user.
•
"Service" password, for maintenance and assistance operators.
•
"Factory" password, for the sole and exclusive use of the manufacturer's employees (not to be disclosed externally).
Some clarifications are given below:
•
To enter the password, type every single digit in the set order from left to right.
•
To move from one digit to the next press [ENTER].
•
To go back one digit just press [ESC]. If the cursor should be on the first digit to the left, then this brings back to the
main window.
Below are the values of the "User" password, the "Service" password and the "Factory" password.
Version 38
[ESC]
[ESC]
[ESC]
[ESC]
[ESC]
[ESC]
[ESC]
[ESC]
Figure 2-6: "Factory" group navigation tree menu.
Factory
Group
Config.
[ESC] / [ENTER]
Selection
Functions
[ESC] / [ENTER]
Selection
Compress.
[ESC] / [ENTER]
Selection
Valve
[ESC] / [ENTER]
Selection
Safety
[ESC] / [ENTER]
Selection
Safety 2
[ESC] / [ENTER]
Selection
Super User
[ESC] / [ENTER]
Selection
Default
[ESC] / [ENTER]
Selection
Config.
Menu
Functions
Menu
Compressor
Menu
Valve
Menu
Safety
Menu
Safety 2
Menu
Super User
Super User
[ENTER]
Password
Menu
[ESC]
Default
Menu
18
Advertisement
Table of Contents
