System Configuration; System Configuration For Plc Development - Mitsubishi Electric MELDAS 60 Series Programming Manual

1. System Configuration

1.1 System Configuration for PLC Development

The system configuration for PLC development is shown below.
Communication terminal
Ladder editing, ladder monitor
and PLC RUN/STOP, etc.
A new development is possible
with the personal computer.
To connector AUX1
Personal computer
Used for ladder development,
creating message, ladder monitor
and saving data.
(H d di k
(Note) Refer to the "MELDAS 60/60S Series PLC Onboard Instruction Manual BNP-B2213" for
edition using the communication terminal (onboard edition), and the "MELDAS 600/60/60S
Series PLC Development Software Manual BNP-B2252" for development using the personal
computer.
RS-232C
Up/downloading is carried out with
the personal computer's development
tool.
d fl di k)
The ladder is developed using
the setting and display unit.
(Onboard development)
Control unit
Base I/O unit
To connector RS-232C
General printer
- 1 -
1. System Configuration